Comm Device Host Mode

SYDEVHMODE

The host mode of the communication device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Category

SYDEVCAT

The device category (RD, CD, ED) in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Enabled

SYDEVENABL

Indicates if device is enabled in the DDS (1=enabled; 0=disabled).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Poll Attempts

SYDEVRETRY

The number of poll attempts.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Poll Delay

SYDEVPDELY

The message delay in milliseconds.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Poll Timeout

SYDEVPTOUT

The message timeout in milliseconds.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Revision

SYDEVREV

The software revision number of the RTU. Posted by the EIE only if the point is defined. Only implemented for the following EIEs: AllenBradleyCIP, EProd, FlowAuto, Weatherford, LufkinSam, Mercury, and ProSoft.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Last User to Poll/Ctrl

SYLASTUSR

The last user to send/retrieve data from device/facility.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Represents the number of configured comm lines for a given remote device. The value can be 1, 2, or 3.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Alternate Comm 2

SYDEVACOM2

The name of the configured secondary communication device. Can be used interchangeably with SYDEVSCOM.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Alternate Comm 3

SYDEVACOM3

The name of the configured tertiary communication device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Curr Comm Line

SYDEVCOMLN

The currently active communication line. 1 for primary, 2 for secondary, 3 for tertiary.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Comm ID

SYDEVCOMID

The device ID of the currently active communication device in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Primary Comm ID

SYDEVPCOM

The name of the configured primary communication device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Secondary Comm ID

SYDEVSCOM

The name of the configured secondary communication device. Can be used interchangeably with SYDEVACOM2.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Address

SYDEVADDR

The device address (including group address if applicable) in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Desc

SYDEVDESC

The device description in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device ID

SYDEVID

The device ID in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Device Type

SYDEVTYPE

The device type (based on EIE) in string format.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Dial Attempts

SYCSMDAT *

The number of total dial attempts (successful and failed).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Attempts Failed Busy

SYCSMDBY *

The number of failed dial attempts due to busy signal.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Attempts Failed Unknown

SYCSMDUK *

The number of failed dial attempts due to unknown reasons.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Attempts Fail No Carrier

SYCSMDNC *

The number of failed dial attempts due to no carrier.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Attempts Fail No Dial tone

SYCSMDND *

The number of failed dial attempts due to no dial tone.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Attempts Successful

SYCSMDOK *

The number of total successful dial attempts.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Dial Retry Attempts

SYCSMDRA *

The number of total dial retries.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Dial Attempt Time

SYCSMDDT *

The time of last dial attempted (failed or succeeded) (MM/DD hh:mm:ss format).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Modem Connect Error

SYCSMDER *

The modem connect failures reported as Error.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Modem Connect No Answer

SYCSMDNA *

The modem connect failures reported as No Answer.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Consecutive Fld Msgs

SYCSFSEQ *

Consecutive Failures

The number of consecutive failed communication attempts.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last device to fail

SYC

Tracks the remote device that last had a failed message on a communication device. The comm device stores the remote ID and the current time when failures occur. The point will only update if the remote ID is not empty and the latest failure timestamp has changed.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device.

Last Fld Com Desc

SYCSLFCD *

Last Failed Desc

The last failed communication message (name of message in text).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Fld Com Time Num

SYCSLFCN *

The time of last failed communication (OLE date/time format in GMT).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Fld Com Time Text

SYCSLFCT *

Last Failed Time

The time of last failed communication (MM/DD hh:mm:ss format).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Fld UIS Desc

SYCSLFUD *

Last Failed UIS Desc

The name of last failed UIS command.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Fld UIS DevId

SYCSLFUI *

Last Failed UIS DevId

The device ID that the last failed UIS command was sent to.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Fld UIS Tm N

SYCSLFUN *

The time of last failed UIS command (OLE date/time format in GMT).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Fld UIS Tm T

SYCSLFUT *

Last Failed UIS Time

The time of last failed UIS command (MM/DD hh:mm:ss format).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Sec Lst Fld Comm

SYCSLFCS

Secs Since Failure

The elapsed time (in seconds) since the last failed communication. When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Points using this UDC update in the following conditions:

• With response processing
• Top of every hour
• Every minute if 20-minute statistics have been configured. See Setting Up 20 Minute Statistics.

Ttl Fld Msgs

SYCSFTOT *

Failed Msgs

The number of total failed messages for all reasons.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Fld Msgs CRC

SYCSFCRC *

Failed CRC

The number of total failed messages due to CRC error.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Fld Msgs No Resp

SYCSFNOR *

Failed No Resp

The number of total failed messages due to no response.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Fld Msgs Other

SYCSFOTH *

Failed Other

The number of total failed message other than CRC or no response.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Fld UIS Cmds

SYCSFUTT *

Failed UIS Cmds

The number of total failed UIS commands.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

# Succ Msgs 1st Att

SYCSS1N *

Success 1st Att

The number of successful messages on the first attempt.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

# Succ Msgs Nth Att

SYCSSNN *

Success Nth Att

The number of successful messages on attempts subsequent to the first.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

# Succ Msgs Ttl

SYCSSTN *

Success Msgs

The number of total successful messages.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

% Succ. 0 Attempts is Reliable

SYCSSTZR

Determines whether to mark the Percent Successful Communication statistic as reliable or unreliable when the attempts count is zero. Default is mark point as reliable.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

% Succ Msgs 1st Att

SYCSS1P *

Percent 1st Att

The percentage of successful messages on the first attempt.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

% Succ Msgs Nth Att

SYCSSNP *

Percent Nth Att

The percentage of successful messages on attempts subsequent to the first.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

% Succ Msgs Ttl

SYCSSTP *

Success %

The percentage of successful messages.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Avg Succ Resp Time

SYCSAPRT *

Avg. Resp Time (ms)

The average successful response time in milliseconds.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Succ Resp Time

SYCSLPRT *

The number of milliseconds for last successful response.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Succ Com Desc

SYCSLSCD *

Last Succ Desc

The name of last successful message.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Succ Com Time Num

SYCSLSCN *

The time of last successful communication (raw UTC time).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Succ Com Time Text

SYCSLSCT *

Last Succ Time

The time of last successful communication (MM/DD hh:mm:ss format, local system time).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Succ UIS Desc

SYCSLSUD *

Last Succ UIS Desc

The name of last successful UIS command.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Succ UIS DevId

SYCSLSUI *

Last Succ UIS DevId

Device ID that the last successful UIS command was sent to.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Succ UIS Tm N

SYCSLSUN *

The time of last successful UIS command (OLE date/time format in GMT).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Succ UIS Tm T

SYCSLSUT *

Last Succ UIS Time

The time of last successful UIS command (MM/DD hh:mm:ss format, local system time).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Sec Lst Succ Comm

SYCSLSCS

Secs Since Success

Elapsed time (in seconds) since the last successful communication.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Points using this UDC update in the following conditions:

• With response processing
• Top of every hour
• Every minute if 20-minute statistics have been configured. See Setting Up 20 Minute Statistics.

Succ Bytes Rcvd: Total

SYCSSBRC *

The number of successful bytes received.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Succ UIS Cmds

SYCSSUTT*

Success UIS Cmds

The number of total successful UIS commands.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Value for %Succ. For 0 Attempts

SYCSSTZA

Determines the value to use in calculating the percent successful when the attempt count is zero. Default is 100.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Lst Dev Drain Tm N

SYCSLDDN *

The last time it was necessary to clear unexpected data from communications channel (OLE date/time format in GMT).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Lst Dev Drain Tm T

SYCSLDDT *

Last Device Drain

The last time it was necessary to clear unexpected data from communications channel (MM/DD hh:mm:ss format).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Lst Drain DevID

SYCSLDDI *

Last Drain DevId

The last device attempted to be communicated with when it was necessary to clear unexpected data from the communication channel.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Last Message Sent Desc

SYCSLBCD *

The name of the last message sent (failed or succeeded).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Last Message Sent Time

SYCSLBCT *

The time of last message sent (failed or succeeded) (MM/DD hh:mm:ss format).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Atmpd Msgs

SYCSTOT *

Msg Attempts

The number of total attempted messages.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Atmpd UIS Cmds

SYCSUTT *

The number of total attempted UIS commands (sum of SYCSSUTT and SYCSFUTT).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Bytes Drained

SYCSDDB *

The total unexpected bytes cleared from the communication channel.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Ttl Bytes Rcvd

SYCSBRCV *

Bytes Received

The number of total bytes received.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Bytes Sent

SYCSBSNT *

Bytes Sent

The number of total bytes sent.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Ttl Device Drains

SYCSDDTT *

Total Device Drains

The number of times unexpected data needed to be cleared from the communication channel.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device or Facility Service (FAC). A FAC facility is defined using the format Site_Service.

Avg Resp Proc. Time

SYMSARPT

The average number of milliseconds to process an item in the processing queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

Avg Ttl Mess Proc. Time

SYMSATMT

The average number of milliseconds to process all items in the processing queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

Pending Comm Queue Cnt

SYCSPEND

The number of messages pending in a communication queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device.

Pending Comm Queue Cnt per Remote Device

SYRSPEND

The number of messages the specified remote device has pending in its associated communication queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable remote device.

Point Value Only Resp Queue

SYPROCQPT

Represents the size of the Point processing queue.

This UDC tracks process messages which do just point processing. Allows tracking of the backlog of the Point processing queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

Processing Queue Count

SYPROCQUE

The number of messages in the UIS processing queue (non-communications related). Examples are device and point updates. Represents the sum of SYPROCQPT and SYPROCQTX. Generally this value is best kept to less than 2.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

Tx Writing Resp Queue

SYPROCQTX

Represents the size of the DDS transaction processing queue. This UDC tracks process messages which will save transaction data to the DDS. Allows tracking of the backlog of the DDS transaction processing queue.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

Activate 20 Min. Stats

SYCSST2M

Activates the use of 20-minute statistics, which is a special rollup of one-minute values for the 20 minutes prior to execution. It helps control the strain that constant recalculation would ordinarily put on a large system.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

20-minute statistics are not represented as current period-last period pairs; there is no previous statistic to compare against the current one. For each minute that passes, the rollup is recalculated with the oldest value dropped off and the most recent value added on. There is no dynamic processing of the 20-minute statistic in between the one-minute processing intervals even if the statistic's point processing is forced by the device.

Activating the UDC for your UIS and selected devices does not enable mapping for the UDC. To enable mapping, you must add specific points by using the appropriate communication statistics system UDC(s) along with the required time period suffix.

20-minute statistics are applicable to communication and remote devices.

For more information, see Setting Up 20-Minute Statistics.

Comm Device State Numeric

SYDVST8N

The communication device state in numeric format. Applies only to the communication device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device.

Return values are:

• 04 - Connected
• 05 - Not Connected
• 06 - Paused
• 07 - Error
• 08 - Disabled
• 09 - Connecting
• 10 - IP Connecting
• 11 - IP Connected
• 12 - Modem Connecting
• 13 - Modem Connected
• 14 - Not Ready

Comm Device State Text

SYDVST8S

The communication device state in string format. Applies only to the communication device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device.

Return values are:

• Connected
• Not Connected
• Paused
• Error
• Disabled
• Connecting
• IP Connecting
• IP Connected
• Modem Connecting
• Modem Connected
• Not Ready

Cryouts: Total

SYCSCRY *

Cryouts

The number of total cryouts.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Curr Active Device

SYCSRDVC

The name of the currently active device. Name is displayed only when device is active; otherwise the value is blank.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Curr Com State Num

SYCSSTTN *

Specifies the state of a device communication channel. Applies to both remote devices and communication devices.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

The following values are possible:

• 00: Assigned if no message has occurred since a UIS start.
• 01: Assigned if a successful message is the most recent message to occur.
• 02: Assigned if a failed message is the most recent message to occur.
• 03: Assigned if a failed message is the most recent message to occur and the interval (in minutes) between the most recent failed message and the previous successful message or UIS start (if no successful message exists since UIS start) exceeds the value specified for SYCOMSTFP.

If using an enumeration input point type, use the COMSTATE table for the conversions.

See Failed Comm Transition Period for information about when 2 – Exception changes to 3 – Critical.

For strings, see SYCSSTAT.

Curr Com State Text

SYCSSTAT *

Specifies the state of a device communication channel. Applies to both remote devices and communication devices.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

The following values are possible:

• Unknown: Assigned if no message has occurred since a UIS start.
• Normal: Assigned if a successful message is the most recent message to occur.
• Exception: Assigned if a failed message is the most recent message to occur.
• Critical: Assigned if a failed message is the most recent message to occur and the interval (in minutes) between the most recent failed message and the previous successful message or UIS start (if no successful message exists since UIS start) exceeds the value specified for SYCOMSTFP.

See Failed Comm Transition Period for information about when 2 – Exception changes to 3 – Critical.

For enumerations, see SYCSSTTN.

Failed comm transition period

SYCOMSTFP

Specifies the interval (in minutes) allowed before a communication state changes from 2 – Exception to 3 – Critical. The interval starts at the most recent failed message and extends to the previous successful message or UIS start (if no successful message exists since UIS start).When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable UIS. A UIS facility is defined using the format Site_Service.

The interval is not tied to current time. For example, imagine you set SYCOMSTFP to 20. A successful message occurs at 3:00:00AM and the comm state becomes Normal. Then no other message occurs until 3:10:00AM, when a failed message occurs and the comm state becomes Exception. At 3:45:00AM a second failed message occurs, which changes the comm state from Exception to Critical. That is because the Exception state was reached and more than 20 minutes passed since the last successful message. The change does not occur at 3:20:00AM or 3:40:00AM.

You can apply the value to a remote device, communication device, and/or an entire UIS. If you apply this value to a remote device, the value applies to all of the remote device’s facilities. If you apply this value at the UIS level, it applies to all remote devices and communication devices in that UIS. The default value at the UIS level is 480.

To change the interval for the UIS, create a point for which the facility is the applicable UIS and the UDC is SYCOMSTFP.

To change the interval for a device, create a point for which the facility is the applicable device and the UDC is SYCOMSTFP.

An edit to this setting does not take effect until a UIS start occurs.

See Failed Comm Transition Period for information about when 2 – Exception changes to 3 – Critical.

Last Active Device

SYCSRDVL

The name of the last active device.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.

Not Ready Events

SYCSSTNR *

The current value of the consecutive Not Ready event counter.When configuring a point to use with this UDC, ensure that the service used is the applicable UIS and that the facility ID is that of the applicable communication device, remote device, or facility linked to a remote device.